Wednesday 19 April 2017

The void increases

Well a week has gone since the start of the layout dismantling.  Ever the optimist I hoped all would be smooth sailing, but seems the layout was happy and wanted to stay as it was in some sections or more like some areas in the sections.

I had hopped that the dismantling would be fairly easy, and go smoothly, to date I would say its a bit of a 50/50 event that way, often a solitary hidden screw would cause a bit of frustration trying to find it by breaking up the scenes area, with the plaster having filled up the heads and time to scratch out the stuff. Some notations have been made that will mean a change in the method and location of where screws will be used in the rebuild.  The down side in a sense of this is that much of the scenery has broken up and had to be put in the bin, meaning some renewals in the future.

I missed taking initial photo's of the dismantling but there are photo's in previous blogs that will show how things were and how they stand as of today, my hope is that the whole layout bench work will be dismantled fully in 4 days as there is only 4 sections to go.

Photo 1 looking from Akuna down to where the Moblayne depot was, now its stand against the wall with the underside showing. The right hand wall is where the staging yard and a down approach to Akuna was
 Photo 2 looking from the same position as 1 with what was left of Akuna at the top and the double approach road underneath.  The right track comes directly down from Jacks Creek on the right through the tunnel portal into what is the down arrival staging yard. The left or outer track comes from the Up staging yard and goes direct to Moblayne via the bridge near the entry door
 Photo 3 looking from the other end of photo 2

 Photo 4 shows Jacks Creek with part rear removed and ready for removal.
 Photo 4 the backdrop wall is gone so is trackwork over the join that can be just seen, the black wire making a defiant stand before removal.
 Photo 6,  Jacks Creek is now gone
Photo 7, looking over Nulla Mountain saw mill prior to its removal today.

As I work and sections removed I continue with thinking of ideas relative to the future, while trying to visualise the future I tried to imagine how things might look without the large partition that seperated Nulla and Jacks creek, also provided a blocking of the view through to Akuna. Doing that was to try and separate the areas in the visual sense.  Looking over it I tried to think HO scale rather than just for the layout but also for the operator and imagined passengers on a train and train crews as to what they might see as they looked out over the journey.

Withe camera position just to the inside of the track that went down from Nulla to Jacks Ck, I aimed it across and towards the up end of Akuna.  The level that Akuna sits on is at the lower part of the backdrop painted board and partly covered by dismantled baseboards. During the pull down of the Mill area the low profile scenery was damaged enough that meant it going in the bin, meaning when renewed I will not have the partition as before but will have the scenery formation made up approximately 40mm higher, so that when looked at from the same eye level as the photo, the Akuna backdrop should provide something of depth to it.

4 comments:

  1. Col,

    It's disappointing that the level of destruction has had to be greater than anticipated. Have you started to think about how the remaining modules will be transported to the new location. Without protection, there is a fair chance that additional damage may occur.

    good luck Phil

    ReplyDelete
    Replies
    1. Thanks Phil

      Its a real question as to the transporting of the sections. As I have had to remove more track than originally contemplated, I have had to do a lot of rethinking at each stage/section is brought down. It has actually helped that I never contemplated scenery in the underneath sections including the staging yard all will remain barren even when the final move is completed.

      Where possible I have tried to keep the scenery intact, but as I have to do it by myself I have tried to be as careful as possible but there has been a bit more break off than hoped for, some large sections have come away clean which I can pack and re-use again, in some ways the better items have survived and they are mostly the newer bits as I changed my methods.

      The new home to be built will actually give me approx 200mm more each wall a 6.1 x 6.0m room as against the 5.9 x 5.9 existing, with some subtle changes being planned, I can readily adapt to a slightly new design as well.

      Key though will be how I can stack and store each base section, I am keeping all the bases with width 38x18mm sections intact, the narrowest will go on the floor and then stack each on top with increasing widths, and using the larger timber supports raise each level above each. The non scenery sections will be set against the walls rather than laying flat, there will be more than enough timber left intact for that process.

      We have to rent for around 8 months until the estate is ready to build on (end of this year) then house construction will start after trade holidays at Christmas, although there is hope that they may get the slab down prior to Christmas which will be great. In the meantime I will be looking at trying to work on some sections especially with some ideas with the track, to ensure its all laid properly and soldering droppers in place.

      Cheers
      Col

      Delete
  2. If it's any help, I have found it best over several moves and some associated storages to build plywood boxes around the modules. it is a bit of an investment in ply but worthwhile to protect them and facilitates stacking and storage. If necessary a box can be opened to facilitate access for interim work.

    cheers Phil

    ReplyDelete
    Replies
    1. Thanks Phil

      Will not rule out any suggestions that will help in storage and the eventual rebuild.

      Cheers

      Col

      Delete